Use on clean and completely dry skin with no cream or cosmetic residue. 1 Remove cover 2 Move switch to ON position(toward head) 3 Purple Sensa-light technology and green LED will flash. 4.Touch the sensa-light head to skin to begin hair removal process.The unit will not begin to work until contact has been made with skin.The purple sensa light Technology head and green activation LED will remain on while the unit is in use.Hold the item to skin and gently glide the head of the unit along skin in the opposite direction of hair growth at a 45º angle(NOT straight up and down) Do not apply excessive pressure during use to avoid damage to skin or head of unit.Discontinue use if any skin irritation results. 5 For short hair,hair stubble or touch-ups,select the Microfoil head.For best results while using the microfoil head,hold the unit straight up and down.(Not on a 45º angle)and apply Slight pressure. 6 This item will turn off within approximately 6 seconds.Green LED will return to flash.Unit will automatically turn on again when it comes in contact with skin. 7 When finished using your item,turn switch to OFF position(away from head),cover and store in a cool dry place.
Charging the Battery
Note:Prior to first use,fully charge item for approximately 2.5 hours. This item must be charged with the supplied USB cable,using either the supplied AC adapter or an alternate USB source. While the unit is charging,the red light will remain on. The green LED will remain on when unit is connected to the adapter and fully charged.Charge will hold approximately 60 minutes run time.
Water will damage the item!Do not use the unit in the shower,near water,or in a damp room. Do not rinse the head under water!To clean the head,use the brush that is included in the package.Make sure the unit is turned off. This item should be switched off and stored in a cool dry place when not in use. For best performance,it is not recommended to use it!while it is charging.
Microfoil head maintance: To maintain optimal performance of the microfoil head,from time to time clippings trapped in the head may need to be cleaned out.The Microfoil head is designed fro easy removal and may be easily cleaned by removing the head from the item,then gently tapping the bottom of the head against a hard surface,such as a sink.The brush included with it may be used to swipe out any remaining clippings.Compressed air,such as computer duster,may also be used to blow the clippings from Microfoil head. The main body of this item underneath the head should also be brushed or blown clean any time the head is cleaned or changed.
Sensa light head maintance The performance of the Sensa light head may be kept at optimal level with regular cleaning(as described above) and lubrication of the sensa light head.To lubricate the sensa light head,after cleaning the head,apply a drop or two of mineral oil(or baby oil)
Important safety instruction-save these instructions
Danger:To reduce the risk of fire or electric shock,carefully follow these instruction. For connection to a supply not in the USA,use an attachment plug adapter of the proper configuration for the power outlet.